Right plowshare

Description

Assembled basic plowshare set with right-hand orientation.

Depending on the variant you choose, the set includes the following components:
1x Holder (0 degree or 20 degree)
1x Universal base (base)
1x Moldboard (Full or Slatted)
1x Share (Single or with knife)

Description of individual components

Holder

The holder is used to connect the plowshare to the plow. We offer two variants, which differ in the angle of connection to the plow plane.

• 0 degrees holder
  We recommend the 0 deg holder for your own projects and for upgrades to our older plows (plows manufactured before 06/2021). The holder is backwards fully compatible with our fixed plows and plows from some other manufacturers.
  
  The mounting M3 holes must be in range from 6 to 8 mm.

• 20 degrees holder
  The 20 deg holder is designed for our latest plows with variable width of plowing. We recommend it if you are building your brand new plow or want to be prepared for future upgrades to our plows.
  
  The mounting M3 holes are 12 mm apart

Universal base

The base holds all the parts together. It is the most important part of the plowshare. The part consists of two plates welded at a 50-degree angle. We always deliver it ready for all accessories. So if you decide to purchase one of the optional upgrades in the future, the base will already be ready for it.

Mouldboard

• Full board
  Universal body shape. Made of 1.5 mm steel, which is very resistant to wear.
  
• Slatted board
  The slatted body is made of 1.5 mm steel, which is very resistant to wear. By reducing frictional surfaces, the passage of soil is positively affected.

Share

Shares cut through the soil to help the plough get into the ground quickly.

• Single share
  Universal share for all soil types and types of ploughing.
• Single share with integrated knife
  Highly suitable for stony soils and shallow ploughing.

Painting

Many customers want us to deliver our products without painting because they want to add final touches on their own. So, this product is delivered without painting.

If you wish to paint this product in our original color scheme, please look at customization section for this product and add painting to the shopping cart.

Production time

This is a custom made product. We usually have a few pieces in stock, even so the usual production time depends on the current production load and the amount of modifications. Typical production time is between 1-2 weeks. If you need to specify the production time, please contact us.